How to Flash Stock Rom using LiveSuit Application

How to Flash Stock Rom using LiveSuit Application.Here are some knowledge’s to Flash Stock Rom on Android Device using LiveSuit Application.

Essential Needed: Compulsory your Android device should have 20-30 percent of battery to perform the Flashing Process.

Flash stock Rom using LiveSuit Application

Step 1: Download and Install Android ADB Drivers on your computer.

Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files:

Step 3: Then LiveSuit.exe from the extracted files.

How to Flash Stock Rom using LiveSuit Application

Step 4: When LiveSuit.exe is launched then Select Yes to follow the Upgrade Wizard.

Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.

Step 6: Then Unplug all the connected Smartphone and tablets from the computer (if you have already connected) after that Click on Next firmntb to Continue.


Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes firmntb and select the firmware.

Step 8: Now, Don’t Click on Finish firmntb.

Step 9: Now, It is the right time to connect your Android Smartphone or Tablets to the Computer using USB Cable. Before Connecting the Android Device, make sure it’s Power Off.

Firstly connect the USB Cable to the Computer then on your Android Device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your device.

Step 10: When your Device is successfully recognized by your computer then you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to continue.

Step 11: On the next Windows, again click on Yes firmntb to continue.

Step 12: Now LiveSuit will start the flashing process (flashing usually takes 4-6minutes to complete)

Step 13: When flashing process is completed successfully then you will able to see Upgrade Succeeds Window. Click on OK to close it.

Step 14: Now, Close LiveSuit Application by clicking on the Exit firmntb.

Step 15: Disconnect your Device from the computer and Restart it.

Congratulations, You have successfully flashed the Stock ROM using LiveSuit Application.

Always keeps in your minds like those:

  • The move tutorial working with firmware only that comes with support to LiveSuit Application.
  • Take Backup: Take a phone backup is compulsory needed because it will be removed your all data of your Smartphone.
  • Alternative Tool: PhoenixSuit is best alternative tool for the LiveSuit Tool. If you want to see you will be Downloaded it.